Stay Plugged In With Canon
Latest News & Updates

Brick exteriors endure years of weather exposure, and even small gaps can invite water intrusion, freeze-thaw damage, and costly deterioration. Begin by assessing the masonry’s condition with a careful visual survey, looking for loose or crumbling mortar, cracked bricks, and efflorescence on surfaces. Plan a repair schedule that prioritizes structural stability before cosmetic fixes. When moisture pathways are controlled, the wall can maintain its insulation properties and prevent heat loss. A well-timed repair also minimizes the risk of interior dampness and mold growth. This initial evaluation sets the foundation for durable, long-term protection that shields interior spaces and preserves curb appeal.

Before you start, gather clean, dependable tools and materials that suit your brick type and climate. You’ll need a chisel or cold chisel, a masonry hammer, a stiff broom, a wire brush, a bucket, and a mortar mix appropriate for exterior use. Choose lime-based or Portland cement-based mortar according to historic accuracy and wall porosity. Prepare joints by removing deteriorated mortar to at least a quarter inch depth, cleaning thoroughly to ensure a solid bond. Protect adjacent surfaces with plastic sheeting or masking. Establish a workable mixing ratio, follow manufacturer instructions, and keep the work area dry and free from foot traffic to maintain consistent results.

A successful repointing project hinges on understanding mortar types, lime versus cement, and how each interacts with brick porosity. Lime-based mortars are forgiving, breathable, and better suited to historic houses, reducing internal pressure and allowing dampness to escape. Cement-based mortars offer greater strength in modern builds but are less flexible and can trap moisture if not matched to the brick’s characteristics. Inspect the wall to determine porosity, brick hardness, and existing mortar hardness. When selecting a mix, replicate historical color and texture to maintain aesthetic continuity. Proper application yields joints that shed water while enabling moisture to evaporate, extending the masonry’s lifespan and preserving architectural integrity.

The actual repointing process requires careful technique to ensure a strong seal without damaging surrounding masonry. Start by dampening joints to minimize lime or cement suction, then pack the new mortar into the joints with a trowel or pointing tool. Strike flush to the face while preserving a slight concave profile to assist water runoff. Work in small sections to maintain control of the mortar’s moisture content and avoid cold joints. Periodically clean excess mortar from brick faces with a damp sponge to prevent staining. Allow sufficient curing time, keeping the area protected from direct sunlight and rain. Proper curing avoids cracking and preserves joint integrity for decades.

Surface cleaning is a delicate step that prepares the wall for deeper repairs without introducing new problems. Use a soft-bristled brush to remove loose mortar, dirt, and efflorescence, avoiding high-pressure washing that can erode brick faces. If calcium deposits persist, apply a mild, environmentally friendly cleaner following label directions. Rinse thoroughly and allow to dry completely before repointing. Once dry, inspect the brick faces for spalling or dusting that could compromise adhesion. Address these issues promptly with appropriate brick repair techniques. Clean, dry surfaces ensure the new mortar bonds firmly and water is prevented from penetrating the wall.

After repairing and repointing, consider protective upgrades that guard against future moisture intrusion. Install or replenish flashing at roof-to-wall transitions, windows, and door openings to divert water runoff away from brickwork. Ensure weep holes remain clear to vent moisture behind the wall cavity, preventing pressure buildup. Seal the ground-level joints where the wall meets the foundation or soil with a breathable sealant that accommodates shrinkage and thermal movement. Landscaping choices should direct water away from the building and away from vulnerable sections. A comprehensive moisture management plan reduces maintenance needs and supports energy efficiency over time.

Raking the joints accurately is critical for longevity and water resistance. Use a sharp pointing tool to remove deteriorated mortar and create a crisp, beveled edge that improves the ability of new mortar to interlock with the brick. Avoid over-deepening joints, which can weaken the wall structure. When the joint profile is finished, inspect for uniformity across the surface to ensure all areas shed water consistently. The goal is a joint that resists capillary action while remaining compatible with the brick’s texture. A consistent joint appearance also enhances curb appeal. Take your time to achieve precision, as rushed work tends to crack or debond after exposure to weather.

Weather conditions influence how quickly you can complete repointing and curing. Plan for dry spells and moderate temperatures; high humidity can slow curing and increase efflorescence risk, while extreme heat can dry mortar too quickly, causing cracking. If you must work in less-than-ideal weather, cover the wall with breathable shelter to control humidity and temperature. Monitor the moisture content of the existing bricks before applying new mortar, ensuring they are neither too dry nor saturated. Patience during curing yields a stronger bond and a longer-lasting masonry system. When in doubt, consult a masonry professional for the best compatible materials and techniques.

Water protection benefits from a holistic approach that includes proper insulation and air sealing around penetrations. Add exterior insulation where needed to improve energy performance, provided you maintain vapor permeability to avoid trapping moisture. Seal around windows, doors, and vents with materials that accommodate movement due to temperature shifts. Consider a breathable underscreed or mortar-lime mixtures that respond well to seasonal changes. By coordinating with roofing and gutter systems, you create a comprehensive shield against wind-driven rain and dampness entering at joints and openings. A well-integrated system reduces heat loss while extending the life of brick and mortar.

Maintenance becomes simpler when you establish a routine that checks for damage after major weather events. Schedule inspections after heavy rain, freezing conditions, or strong winds to catch problems early. Look for new cracks, discolored efflorescence, loose bricks, or water stains on interior walls adjacent to the exterior. Address issues promptly with targeted repointing or brick repair, then reseal and protect the area. Document changes with photos and notes to track the wall’s condition over time. A proactive maintenance program preserves structural integrity and keeps exterior spaces looking durable and well cared for.

The long view on brick maintenance emphasizes prevention, not just repair. Keep gutters clear and downspouts directed away from foundation walls to minimize mortar washout and brick erosion. Regularly rinse surfaces with a gentle spray to remove salt or dirt that can degrade mortar joints. Repoint any joints showing early signs of failure, prioritizing those near water outlets and roof lines. Consider seasonal inspections that align with the building’s climate and moisture cycles. A steady routine reinforces the wall’s resilience and preserves the timeless character of masonry aesthetics for generations.

Finally, document your project and note any adjustments for future repairs. Record the mortar type, color, and joint profile used, plus the climate and curing conditions during application. Keep a file of supplier details and warranty information for materials. Share lessons learned with family or neighbors to foster better maintenance practices in the community. By treating repointing as ongoing care rather than a one-off fix, you ensure your brick exterior remains watertight, visually appealing, and capable of withstanding changing weather patterns. A thoughtful, methodical approach yields enduring results and peace of mind.