Stay Plugged In With Canon
Latest News & Updates

Replacing aging mechanical faucets with touchless designs offers hygiene benefits, water conservation, and modern convenience that can significantly improve daily routines. Before you buy, assess your existing plumbing layout, identify whether the sink uses standard 3/8 inch or 1/2 inch supply lines, and note the faucet mounting style. Consider how often you use the sink and whether you need separate hot and cold zones or a single sensor for both. Some models require a power supply or battery pack, while others feature hardwired connections. A careful survey of the space helps you choose a unit that fits the depth, height, and reach of your sink, reducing installation complications and post-install adjustments.

When choosing a touchless faucet, prioritize sensor range, response speed, and reliability in varied lighting. Look for models with adaptive infrared sensors or capacitive touchless technology that ignore minor reflections from metal or glass items nearby. Check for adjustable sensitivity settings to prevent false activations, especially in busy kitchens or households with children. Evaluate mounting depth compatibility and ensure the faucet spout reach aligns with the sink bowl to avoid splashing and awkward water flow. Additionally, verify that the valve mechanism is known for long-term durability, corrosion resistance, and simple replacement parts. Reading user reviews and manufacturer specifications helps predict real-world performance.

A successful installation begins with a practical electrical plan that aligns power options with your home’s code requirements. Some touchless faucets operate on standard 120-volt outlets via a dedicated transformer, while others use replaceable batteries or a rechargeable pack. If you opt for a corded power supply, ensure there is a safe, accessible outlet nearby and that the cord won’t create tripping hazards or become cluttered by under-sink components. For under-sink installations, use strain reliefs and sealed outlets to protect against moisture. Battery-powered models offer more flexibility in placement but require periodic replacement, which should be considered in your maintenance schedule. Choosing wisely saves service calls and preserves warranty coverage.

Sensor placement is crucial for intuitive use and avoiding misfires. In a kitchen, position the sensor above the spout area where your hands naturally arrive, staying clear of the splash zone to prevent false triggers from water droplets. In bathrooms, a higher sensor under the faucet can detect hand movements without accidental activations from towel racks or mirrors. Some models provide adjustable sensor range through a small dial or software setting; use it to accommodate different user heights and the sink’s depth. If installing near a window or bright lighting, test the sensor’s performance at various times of day to ensure consistent operation. Proper placement enhances reliability and user satisfaction.

Evaluating power options requires balancing convenience, upfront cost, and ongoing maintenance. Battery-powered touchless faucets avoid a vanity or cabinet outlet, which can simplify sourcing and installation but may incur higher long-term battery costs. Rechargeable packs reduce ongoing expenses but demand careful monitoring to avoid unexpected outages. Cabled units are predictable in operation, yet they may require rerouting wiring, adding to labor costs and potential code considerations. When planning, consider accessibility for battery replacement or pack recharging, and verify that the electrical setup complies with local electrical codes. A well-chosen power strategy minimizes downtime and supports smooth daily use.

In addition to power, consider water supply line requirements and valve compatibility. Most touchless faucets connect to standard 3/8 inch supply lines with a compression fitting, but some models need 1/2 inch connections or flexible hoses that accommodate tight under-sink spaces. Check the valve type—whether a ceramic disc or a similar robust mechanism—as this affects sealing performance and longevity. Some faucets include integrated check valves to reduce backflow risk, while others rely on external anti-siphon ports. If your existing supply lines show signs of corrosion or leaks, plan to replace them with corrosion-resistant brass or stainless steel lines. A thorough evaluation prevents leaks and ensures dependable operation.

Calibrating sensors to your household routines avoids misfires and enhances reliability. Start by testing the faucet in normal daily conditions, watching for consistent response times and accurate shutoff when hands leave the sensor range. If the unit includes a warm-up or delay setting, adjust it for both convenience and water conservation. In households with pets or small children, increasing sensitivity might cause unwanted activations; dialing it back reduces waste and mess. Some models support remote calibration via a companion app, enabling you to fine-tune sensitivity and timeout periods without disassembling the faucet. The goal is seamless, hands-free use that remains dependable across seasons and lighting variations.

After sensor tuning, address installation details that influence long-term performance. Ensure the mounting hardware is secure and that seals are correctly seated to prevent leaks. Use plumber’s putty or Teflon tape on threaded connections as appropriate, and verify that supply lines are not kinked or stressed by under-sink clearance. If your sink has a shallow basin, a compact faucet with a low profile can prevent interference with cabinet doors or drawers. For homes with hard water, select a model with a water-resistant finish and maintain the aerator to avoid mineral buildup that reduces performance. Finally, register the product to activate warranties and access support if problems arise.

The day of installation should follow a logical sequence that minimizes disruption. Start by turning off water supply and exhausting residual pressure before removing the old faucet. Mount the new unit according to the manufacturer’s template, then connect supply lines with the correct fittings and a tight, leak-free seal. If the faucet uses a power adapter, route the cable away from heat sources and moisture, securing it to the cabinet with clips to prevent snagging. Turn the water back on slowly and inspect for leaks at every joint. Activate the sensor and run several test cycles, adjusting sensitivity as needed. Document the process with notes on any adjustments for future maintenance.

Routine maintenance sustains performance and extends the faucet’s lifespan. Wipe down the sensor area regularly to remove fingerprints and mineral deposits that can inhibit detection. Periodically inspect hoses for wear, looking for cracks or bulges that signal imminent failure. Clean the aerator to maintain steady flow and reduce turbulence that might trip the sensor’s proximity. Replace batteries on a schedule or recharge the pack when indicated by the unit’s indicator. Finally, review warranty terms, keep the model’s documentation, and schedule professional service if you notice a persistent leak, erratic activation, or abrupt loss of power.

Upgrading to a touchless faucet is a smart investment in hygiene, water efficiency, and convenience when planned thoughtfully. Start by inventorying your sink’s dimensions, existing supply lines, and electrical accessibility. Select a model with robust sensor performance, durable valves, and compatible power options to match your home’s needs. Prepare for installation by ensuring an unobstructed path beneath the sink and a clean, dry workspace. During setup, verify all fittings are secure and that the power supply is adequately protected from moisture. After installation, program the sensor, test thoroughly, and create a simple maintenance schedule that includes battery checks and annual inspections.

By approaching the project with clear steps and attention to detail, you can achieve a durable, touchless system that performs reliably for years. Consider whether you want a single-handle unit with a universal sensor or separate controls for hot and cold water to enhance user experience. If you frequently switch between cold and warm water, ensure the unit accommodates rapid temperature adjustments without compromising sensor accuracy. Finally, keep a list of replacement parts and preferred suppliers in an easily accessible location. A well-documented plan reduces downtime, helps with future renovations, and supports ongoing energy and water savings through consistent, hands-free operation.