Stay Plugged In With Canon
Latest News & Updates

When planning a bearing and seal replacement for a motorcycle swingarm, start with the bike’s service history and the original specifications from the manufacturer. Confirm whether the swingarm uses cartridge bearings, bushings, or a mixed arrangement, and check for any recall notices or service bulletins related to rear axle geometry. Measure the current play in the rear hub and inspect the seals for signs of cracking, hardening, or oil leakage. Consider the load the suspension faces, including rider weight, luggage, and riding style. This baseline helps you choose parts that restore original alignment tolerances while accommodating any upgrades or spring changes you’ve already made.

When selecting bearings, prioritize precision-fit parts sourced from reputable manufacturers with documented tolerances. For most modern sport or standard motorcycles, cartridge bearings with metal shields or seals designed to resist water intrusion and dirt ingress perform well. Look for bearings that specify radial and axial load ratings compatible with your model’s swingarm geometry. For seals, choose ones that resist oil swell and solvent exposure, and ensure the inner and outer diameters match your axle and housing. Verify that the seal construction includes robust dynamic lips for consistent contact under varied temperatures and speeds.

A key goal is restoring the exact spacing and centering of the rear wheel relative to the frame and chain line. If the bearings are oversized or undersized by even a small margin, the wheel can develop lateral play that compounds under acceleration and braking. Examine the bore surfaces for galling, pitting, or corrosion, and confirm that the seal lip remains in full contact with the bearing race during rotation. Choose a seal with a compatible material for the existing oil type and the surrounding aluminum or steel components. Proper seating tools, alignment marks, and clean housing bores help ensure the replacement parts restore factory geometry.

In addition to the parts themselves, pay attention to installation methods that protect alignment. Use a torque sequence recommended by the manufacturer to avoid warping the swingarm or over-compressing the bearing. A press-fit or interference-fit bearing should be driven straight with a bearing race driver, avoiding hammer blows that can crack seals or misalign races. Clean all surfaces to remove residual grease or dust, and verify that any spacers, collars, or washers are present in the correct order. After assembly, rotate the wheel by hand to feel for smoothness and any rough spots that would indicate misalignment.

Compatibility with your tire size and chain configuration matters because tighter or looser setups shift the load path through the swingarm. If you’ve upgraded to a larger wheel or a different sprocket ratio, confirm the new arrangement doesn’t introduce unexpected side loads that could destabilize bearings. Check the endplay in the wheel by applying gentle rotational force while the bike is supported. Any noticeable drag, grinding, or binding indicates either improper seating or a need for spacers. Order bearings with the correct inner diameter, outer diameter, and width to match the exact swingarm pocket and axle retaining hardware.

Seal choices hinge on environmental exposure and maintenance intervals. If you frequently ride in rain, dirt, or dusty roads, select seals with higher lip stiffness and improved low-temperature performance. Some seals feature reinforced dust lips, while others employ multi-lip designs to extend life under abrupt directional changes. Consider the grease or lubricant you plan to use, ensuring the seal material is compatible to prevent swelling or degradation. A good seal not only blocks contaminants but also preserves the lubricant film between the bearing and the race, reducing wear during high-load events like hard braking or aggressive cornering.

After installing new swingarm bearings and seals, recheck alignment by measuring the wheel alignment relative to the frame and chain line. Use alignment marks or a calibrated gauge to confirm the hub sits centered and parallel to the frame. Rotate the wheel slowly and listen for any abnormal noise indicating misfit or foreign material between the race and seal. Check for even contact along the seal lip as the wheel turns. A precision setup will show minimal lateral movement under load, which is essential for predictable handling and tire wear. If there’s any deviation, disassemble and inspect seating depth and bore cleanliness.

A final quality check should include a test ride under controlled conditions. Begin with short, low-speed accelerations to feel for any wobble, drag, or steering anxiety that hints at misalignment. Progress to moderate speeds and cornering to detect subtle shifts in wheel tracking. During the ride, monitor any oil or grease seepage around the swingarm hubs, which could indicate seal failure. Keep an eye on the tire wear pattern; uneven wear often traces back to imperfect alignment. If you notice recurring drift or a change in rear tire contact patch, revisit the bearing preload, race seating, and spacer arrangement before logging miles.

One frequent mistake is mixing old and new components or using incompatible seal materials with a particular bearing grade. This mismatch can create uneven resistance across the bearing and produce lateral play. Ensure that the replacement set matches the original part family, whether it’s a standard shielded bearing or a purpose-built motorcycle variant with enhanced sealing. Also, don’t overlook the importance of proper lubrication; apply a light, manufacturer-approved grease to the bearing surfaces if recommended, and avoid over-lubrication that can attract dirt. A consistent lubrication approach helps preserve smoother operation and reduces heat buildup during warm rides.

Another common issue is improper seating depth due to missing spacers or incorrect washer thickness. Always verify the exact stack height specified for your model, including any manufacturer-approved shim kits. An insufficient stack height can pinch the bearing, increasing friction and reducing life, while too much clearance causes wobble. Take time to measure with calipers and, if possible, consult the service manual or a dealership technical bulletin. Correct seating also means ensuring the axle clamps are torqued to spec, so the whole assembly remains rigid under high-load conditions.

Developing a proactive maintenance routine helps sustain the alignment benefits of new swingarm bearings and seals. Schedule periodic inspections that include visual seal condition checks, bearing play tests, and a look for lubricant seepage around the hub. Track mileage and riding conditions to anticipate wear progression, especially if you ride on rough roads or endure heavy loads. If you notice any increase in lateral play, address it promptly; waiting can accelerate wear on the races and reduce steering accuracy. Documenting changes over time gives you a baseline to compare future replacements and plan maintenance windows.

Finally, balance cost, performance, and reliability when choosing bearings and seals. Premium ceramic or hybrid bearings may offer lower friction and longer life, but they come at a higher price. For many riders, a high-quality, well-sealed conventional bearing with a robust seal provides excellent value and dependable performance. Consider a kit that includes all necessary spacers and o-rings to simplify installation and ensure consistent results. If you’re unsure about sizing or seating steps, seek guidance from a trusted mechanic or the OEM technical support line. A measured, informed approach yields a smoother ride and preserved rear-wheel alignment for countless miles.