Stay Plugged In With Canon
Latest News & Updates

When planning an upgrade to larger diameter tires, the most critical factor is backspacing, which determines how far the wheel sits inboard toward the suspension and in relation to the brake components. A wheel with the correct backspacing keeps the tire from rubbing on the strut, control arms, or inner fender well during full suspension travel. It also helps preserve the vehicle’s steering geometry, avoiding bump steer and unintended toe changes at lock. To begin, measure your current wheel’s backspace or consult the original equipment specification sheet. This baseline informs every subsequent decision about aftermarket wheels.

After establishing the baseline, compare the offset and diameter of potential wheels against the stock setup. Offset is the distance from the wheel’s mounting surface to the centerline; a positive offset places the mounting surface inward, reducing outward protrusion, while a negative offset pushes the wheel outward. When you fit larger tires, you often need a wheel with a slightly different offset to maintain the same track width and clearance. Vendors provide fitment charts; use them as a starting point, but verify by calculating the exact inner clearance, outer clearance, and potential contact points in the wheel wells under full steering lock and compression.

A systematic approach begins with documenting the suspension travel limits and the worst-case tire deflection. Measure how the tire bead and sidewall interact with fenders, liners, and fender lips at full compression and full articulation. If rubbing occurs, identify whether the contact is with the inner fender, the control arm, or the wheel arch. Use this data to guide wheel selection: a wheel with more backspacing can pull the tire inward, while a wheel with less backspacing may clear components but risk rubbing at full flex. Be mindful of brake caliper clearance, as some larger tires require a wheel design with appropriate spoke clearance around the rotor.

When choosing wheel width and diameter, prioritize compatibility with the chosen tire. A wider tire increases the risk of rubbing unless the wheel diameter and offset provide sufficient room within the arch. Additionally, consider the vehicle’s suspension travel, spring rates, and any aftermarket lift or leveling kit installed. If you have a factory wheel offset that matches the original tires’ footprint, your upgrade plan should aim for a like-for-like footprint with subtle adjustments. Some drivers also opt for spacers, but spacers can alter hub load, introduce new wear paths, and potentially affect steering feel if not installed correctly.

When evaluating wheel options, inspect hub bore size and center bore alignment. A mismatch forces the wheel to rely on lug nuts without proper seating, which can cause runout and hub-centric issues. Choose wheels that are hub-centric or use appropriate hub-centric rings to ensure even load distribution and reduce vibration. Confirm the bolt pattern matches the vehicle exactly, and ensure the lugs are torqued to spec to prevent galling or loosening under load. Also verify the wheel’s brake clearance, because a caliper with a large piston can intrude on spoke area, especially near the caliper mounting area, causing rubbing during heavy braking.

Don’t overlook tire sidewall height and overall diameter. A larger diameter tire increases the wheel’s outer radius, which may bring the tread closer to the fender lip or inner wheel well. If you observe any contact during static fitment, take a step back and reconsider the wheel’s offset or width. In some cases, a slightly taller tire combined with a narrower wheel can maintain the same footprint while reducing rubbing risk. When possible, test-fit with the actual tires on the chosen wheels, including at full steering lock and suspension compression to catch clearance issues early.

Before finalizing, simulate the fit using cardboard templates or dry runs with masking tape marking potential contact points. This practice helps visualize clearance without mounting heavy tires. If a rubbing issue appears, it often originates from the fender liner or the inner fender’s stiff mount. Solutions include trimming the liner (carefully and conservatively), relocating or softening mounting points, or selecting a wheel with a deeper lip relief to avoid contact zones. A careful approach keeps the appearance consistent while preserving fitment margins and avoiding costly modifications to the suspension or body panels.

Working with professionals can save time and protect warranty coverage. A tire and wheel technician can measure clearance precisely, compare current geometry against possible upgrades, and suggest specific wheel models with exact offsets and widths that align with the vehicle’s front and rear track requirements. When discussing choices, provide vehicle specifics such as model year, trim, existing lift, suspension components, and the intended tire size. An expert can also advise if a different tire height is advisable rather than forcing a wheel with improper offset. Clear communication ensures safe, predictable handling and a durable fit.

A correct setup will maintain steering feel and alignment stability across the full range of motion. You should notice minimal to no rubbing during daily driving, even when the suspension compresses as the vehicle encounters bumps or road irregularities. The wheel should sit within the fender line without forcing the fender to flex or crack. In many cases, the vehicle’s original alignment remains within normal tolerance after a wheel and tire upgrade, provided the footprint is kept consistent and caster, camber, and toe adjustments were not drastically altered. Monitoring tire wear patterns can also reveal minor misalignments early.

Another indicator of a well-chosen wheel is predictable handling in cornering, braking, and high-speed conditions. If you experience sudden steering resistance, uneven tyre wear, or vibrations that intensify under acceleration, recheck the wheel diameter, offset, and backspacing. Road test at varied speeds and on diverse surfaces to validate stability. A properly matched wheel-tire package lessens the likelihood of contact-induced drag and reduces the risk of accelerated wear on suspension bushings and ball joints. It also ensures the vehicle remains compliant with wheel well clearance standards in your region.

Over time, changes to suspension geometry or tire pressure can alter clearance. Regularly inspect wheel-tire clearance after seasonal changes, weight transfer from cargo, or changes in load. If you notice rub marks on the inside of the fenders or on the tire sidewall, reassess the wheel’s offset, width, and tire size. Keep a spare tire and wheel that match the upgrade to simplify future rotations and to ensure uniform wear. Some drivers prefer a temporary spacer solution, but long-term spacers can introduce stress concentrations that affect wheel hub integrity. Periodic inspection helps catch issues before they escalate.

Finally, document all measurements and fitment decisions for future reference. Save the exact wheel model, offset, backspacing, tire size, and any trimming or liner modifications performed during installation. This record proves invaluable when you rotate tires or switch to different sizes later, ensuring you can replicate the safe, rubbing-free setup. If you plan to revert to stock wheels, having precise data makes the process efficient and reduces the risk of misfitment. With careful planning, you preserve handling, prevent rubbing, and maintain the vehicle’s intended geometry after a tire upgrade.