Stay Plugged In With Canon
Latest News & Updates

Choosing a reinforced tailgate assist spacer kit begins with a clear assessment of your truck’s tailgate weight and the typical load you carry. Heavy tailgates can strain the gas struts, leading to sluggish lowering or abrupt, unsafe drops that threaten cargo and tailgate hinges. A spacer kit is designed to redistribute some of that weight and reinforce mounting points, improving control during lowering. Look for materials that resist corrosion and fatigue while remaining compatible with your tailgate design. It’s helpful to measure the hinge spacing and the available clearance around the latch and striker. With accurate measurements, you can compare kits that specify vehicle fit and load ratings.

Beyond fit, evaluate the engineering behind the spacer’s standoff height and how it integrates with your existing tailgate assist hardware. A well-made spacer kit should not interfere with the latch or security features, and it should preserve full access to bed controls. Pay attention to the way the kit distributes load—whether through a single robust block or a calibrated set of shims—and whether the installation preserves smoothness in operation. User notes from others with similar pickup configurations can reveal whether a particular spacer improves control across varied weather conditions, including cold mornings where metal contracts and damp environments where corrosion resistance matters.

Start by confirming compatibility with the tailgate’s original gas spring and mounting hardware. Some spacer kits are universal, while others are model-specific; mismatches can cause binding or unexpected slack during lowering. Next, inspect the spacer’s material composition and coating. Aluminum with anodized finishes or hardened steel components offer a balance of strength and lighter weight, but you must ensure they won’t contact painted surfaces or hardware that could wear over time. Clear installation instructions are essential; a kit that requires professional tools or significant fabrication can increase total ownership costs and downtime, undermining the intended ease-of-use benefit.

After establishing fit and material quality, consider how the spacer affects the tailgate’s damping characteristics. A good spacer kit enhances controlled descent without creating a "slamming" effect or a lingering, slow drop. Some kits incorporate a graduated set of spacers to fine-tune the lever arm, allowing you to tailor the lowering speed to your preference and cargo load. Additionally, verify that the kit maintains alignment between the tailgate and bed sidewalls to prevent uneven wear on the hinges. A well-balanced setup reduces vibrations and helps preserve the life of the tailgate seal.

Load balance is not just about reducing downward force; it’s also about ensuring the tailgate rises evenly when opened and lowers predictably when closed. A reinforced spacer adds a small, strategic offset that compensates for off-center loads, especially when you haul bulky or heavy items. This adjustment helps the gas struts work within their optimal range, reducing excessive strain on one side. Consider whether the spacer kit relies on hardware that can be re-torqued after the first few uses, as initial settling can change alignment. A kit that allows some micro-adjustment will help maintain perfect balance as the bed conditions evolve with different cargo.

In practice, the correct spacer kit makes the tailgate feel lighter in the hand without compromising stability. You should notice a smoother, more controlled descent even when your bed carries a heavy load close to the tailgate. The benefit is not solely comfort; it translates to fewer accidental drops, less wear on the hinges, and a longer lifespan for the tailgate mechanism. Before committing, read warranty details and service recommendations. Some manufacturers offer lifetime or multi-year coverage on hardware components, which reflects confidence in their engineering and materials.

When evaluating installation, assess whether the spacer kit uses simple bolt-on hardware or requires drilling and re-routing of cables or lines. The easiest installations are those that respect factory fasteners and alignment, letting you revert to stock setup if needed. Check if the kit includes anti-corrosion fasteners or sealants to protect exposed threads from moisture and road salt. Visual checks after installation—ensuring no interference with tailgate latching, remote unlocking, or backup cameras—are essential to a reliable long-term solution. Some kits ship with a torque guide, helping you apply consistent pressure on all fasteners without over-tightening.

Consider the overall weight of the spacer components and how they affect payload capacity. Even a small increase in static weight can influence fuel economy and payload distribution across the truck bed. A smart spacer design minimizes added mass while delivering the necessary strength. Look for integrated sealing or shock-absorbing surfaces that cushion impacts during tailgate operation. The best kits accommodate diverse climates, offering stable performance from blistering heat to freezing cold without cracking or warping.

In everyday driving, a reinforced spacer translates to more predictable tailgate behavior under varying loads—whether you’re transporting appliances, building materials, or outdoor gear. The tailgate lowers smoothly rather than lurching, reducing the risk of tipping items as they settle into the bed. Drivers often report improved confidence when opening and closing in confined spaces, such as beside a trailer, behind a parked car, or near a steep driveway. The kit should not create excessive play, which could compromise seal integrity or trigger false alarms in electronic tailgate systems. A balanced system also guards against squeaks and rattles that can emerge with heavy, repeated use.

For buyers who want long-term value, prioritize a spacer kit with a proven track record and responsive customer support. Look for clear installation videos, printable guides, and access to troubleshooting advice. A manufacturer that stands behind the product with updates for new truck models shows commitment to ongoing compatibility. Read independent reviews that describe real-world outcomes, including improvements in lowering speed consistency, reduced strain on the mounting points, and maintenance notes that help you plan future service intervals. Solid documentation reduces guesswork and speeds up the upgrade process.

Before you buy, compile a short shopping list that includes your truck year, model, and bed length, plus the specific tailgate features you rely on most. Confirm the spacer kit’s tested load rating and whether it supports both open and closed positions without friction. Ensure the product includes all necessary hardware and a clear return policy. If possible, compare several brands side by side to understand how each approaches weight distribution, ease of installation, and compatibility with aftermarket gas springs. A well-chosen spacer kit is an investment in safety, durability, and smoother daily operation rather than a quick novelty add-on.

Finally, weigh the total cost of ownership, including potential installation labor, required tools, and future maintenance. Factor in the price against anticipated benefits like easier tailgate operation, better load balance, and reduced wear on hinges and latches. A thoughtfully designed spacer kit will pay for itself through extended component life and improved usability. After installation, perform a thorough test in multiple scenarios: fully loaded, partially loaded, and empty. If anything feels off, revisit the alignment and torque settings. With careful selection and proper fitting, your pickup’s tailgate can lower smoothly, safely, and consistently, mile after mile.